Product Description:
The GW4-40.DW outdoor high-voltage disconnector produced by our company has a double-column horizontal opening structure. It is a product that has been improved in accordance with the State Grid Corporation of China.
Details of Product
1. The conductive contact fingers are self-operated and silver-plated. They adopt an external pressure spring structure and have the functions of non-magnetic, sterilization, heat insulation and anti-rust. The conductive alarm is made of U-shaped T2 all-copper material, which is first silver-plated and then specially treated to have anti-oxidation function. 2. The wiring seat is made of aluminum alloy profiles, and is connected to the conductive rod by soft copper. It has a simple structure, reliable conduction, and is free of maintenance costs.
3. The transmission part adopts a gearless all-connecting rod transmission structure, so that the overall matching gap of the disconnector reaches zero value in theory. The stability and reliability of the disconnector action are qualitatively improved, especially the operating status of the disconnector is passed through the connecting rod. Locking, its earthquake resistance, wind resistance, and self-locking capabilities are greatly improved, especially under vertical use conditions, the overall performance remains unchanged for a long time, and it makes installation and debugging easier.
4. The universal joint and connecting rod rotating shaft are made of stainless steel with special technology, lined with oil-free self-lubricating sleeves, and do not rust. This completely solves the adjustment difficulties, poor movement consistency, and transmission problems caused by the large fitting clearance of ordinary shaft pins and rotating shafts. Problems such as poor stability. The base and bearing position are integrated with oil-free lubricated bearings, maintenance-free design, small size, good sealing, simple structure and flexible rotation. 5. The base, transmission rods, and standard parts of the product are all hot-dip galvanized or vacuum galvanized. The product adopts a building-block modular structure design, and no welding is required on site during installation.
6. Use porcelain pillar insulators with a bending load of more than 6kN and a creepage distance that meets Level 4 or above pollution use. Silicone rubber insulation can also be used according to user requirements.
7. The operating mechanism can be electric or manual. The electric mechanism uses the latest technology reduction device, which has low output power, low noise, wear resistance and easy operation.

Hot Tags: GW4-40.5DW Outdoor High Voltage Disconnector, China GW4-40.5DW Outdoor High Voltage Disconnector manufacturers, suppliers, factory, High Voltage Disconnect Switch, China Disconnect Switch manufacturer, Outdoor Manual High Voltage Isolation Switch, New Outdoor High Voltage Isolation Switch, Indoor High Voltage Isolation Switch, Outdoor type Disconnect Switch

