Product Description:
The GW4-126DW outdoor high-voltage isolating switch produced by our company has a double-column horizontal opening structure. It is a product that has been improved in accordance with the regulations of the State Grid Corporation of China.
Details of Product
Structural features:
The contact finger that brings you is independent, relying on its own elastic deformation to maintain contact pressure, and is assisted by non-magnetic, insulating and heat-insulating springs. Maintain contact pressure for a long time. Self-cleaning type, during the closing process, the contact finger first slides into contact for 30 to 40mm, which effectively removes surface attachments and ensures good contact. In addition, the contact fingers are all silver-plated to effectively reduce resistance. 2. The conductive arm is made of U-shaped T2 all-copper material, which is first silver-plated and then specially treated to have anti-oxidation function.
All joints and universal joints of the transmission part are made of stainless steel or cast steel, and the rotating part adopts oil-free self-lubricating bushings. Compared with the traditional shaft pin perforation structure, this transmission has the advantages of rotational flexibility, small clearance, and no rust. It improves adjustment accuracy, reduces operating errors, and improves reliability. The bearing seat is made of high-strength aluminum alloy casting, using tapered double bearing positioning and domestic high-precision bearings. The mating surfaces of the bearing seat, rotating flange and bearing are highly processed to make the flange rotation smooth and flexible, and the shaft seat is well sealed. .
The base, transmission rods, and standard parts of the product are all hot-dip galvanized or vacuum galvanized. The product adopts a building-block modular structure design, and no welding is required on site during installation.
4. The base, transmission rods, and standard parts of the product are all hot-dip galvanized or vacuum galvanized. The product adopts a building-block modular structure design, and no welding is required on site during installation.
5. Use porcelain pillar insulators with a bending load of more than 6kN and a creepage distance that meets level 4 or above for dirty use. Depending on the user, silicone rubber insulation can also be used.
6. The operating mechanism can be electric or manual. The electric mechanism uses the latest technology reduction device, which has low output power, low noise, wear resistance, and easy operation.

Hot Tags: GW4-126DW Outdoor High Voltage Isolating Switch, China GW4-126DW Outdoor High Voltage Isolating Switch manufacturers, suppliers, factory, Disconnect Switch datasheet PDF, Outdoor High Voltage Ceramic Disconnector, get quote for Disconnect Switch, High Voltage Disconnect Switch, Disconnect Switch with earth switch price, Disconnect Switch cost

