Details
The performance indicators of the DLJ series portable short-circuit grounding wires produced by our company comply with the SD332-89 industry technical standards, and have been inspected by the State Electric Power Corporation's Electrical Safety Equipment Quality Supervision, Inspection and Testing Center and approved for network promotion.
The main components of this product include wire hook clamps, or flat cable clamps for electric strips, jumper short-circuit grounding tail wires, wiring lugs, manifolds, grounding terminal clamps or five-proof locking chucks, grounding steel fibers, and grounding operating rods, etc. composition. The wire clamp frame is made of high-quality wrought copper (or wrought aluminum) with a polished die-cast surface and is tightly connected to the wire nose. The wire is an important part of the "Portable Short-circuit Grounding Wire"; the short-circuit wires and grounding wires produced by our company are all certified by the Department of Energy. It has been identified that its superior technical performance exceeds that of similar French products, providing a reliable guarantee for the safety of high and low voltage power transmission lines and electrical equipment during power outages. The grounding operating rod is made of imported fiberglass epoxy resin tubes with excellent mechanical strength and insulation properties, which are prepared according to the type requirements.
DLJ series portable short-circuit grounding wires are divided into two types: split-phase type and closed type. Applicable voltage: 500V, 10KV, 35KV\110KV, 220KV, 500KV, etc. It is suitable for power plants, power supply, telecommunications, railways, subways and other power substation users and construction units. At the same time, special specifications of grounding wires can be customized as required.
DLJ-ground wire main technical parameters
|
Model |
Applicable voltage (KV) |
Applicable conductor section (mm²) |
Rated short circuit current (KA/1s) |
Equipped with short-circuit grounding wire load height (mm²) |
Effective insulation length of rod (mm) |
20℃ DC resistance Ω/km is not greater than |
Usage |
Remark |
|
DLJ-1 |
0.5 |
6-50 |
4.2 |
16 |
≥100 |
1.160 |
Handheld |
Applicable wire |
|
DLJ-2 |
0.5-1.0 |
25-240 |
6.5 |
25 |
≥300 |
0.758 |
brake type |
Dual-purpose cable |
|
DLJ-3 |
10-220 |
25-400 |
6.5-9 |
25-35 |
≥700-2000 |
0.758-0.379 |
Spiral |
Applicable wire |
|
DLJ-4 |
10-500 |
25-600 |
6.5-13 |
25/50 |
≥900-3700 |
0.758-0.536 |
Hook type |
Applicable wire |
|
DLJ-5 |
110-220 |
25-400 |
6.5 |
25 |
≥1300-2100 |
0.758 |
Spiral |
Dual-purpose cable |
|
DLJ-6 |
110-500 |
400-600 |
13 |
50 |
≥1300-3700 |
0.379 |
Drop clamp type |
Applicable wire |
|
DLJ-7 |
10-220 |
25-240 |
6.5 |
25 |
≥700-2100 |
0.758 |
Single lever |
Dual-purpose cable |
|
DLJ-8 |
10-35 |
25-600 |
6.5 |
25 |
≥700-900 |
0.758 |
Hand-held semi-automatic |
Applicable wire |
Hot Tags: dlj series portable grounding wire, China dlj series portable grounding wire manufacturers, suppliers, factory, safety testing tools, safety generators, safety stapling tools, safety measuring tools, safety riveting tools, safety taping tools

